Best 2 Ribbon Cable Bracelet 2016

Welcome visitors to the blog ribbon cable
Today's theme is center on the Best 9 Ribbon Cable Bracelet there are different types and designs of each one of them the pros and cons
Today we will try to provide the best types and designs Ribbon Cable Bracelet

1 - Ribbon Cable Wrist Bracelet

Use a small ribbon cable to make we want, but elegant wrist bracelet / ring. All you need is a small ribbon cable (in length), ideally about 8-10 lanes, and a pair of pliers and something thin plastic and metal cutting (I used a pair of wire cutters). Obviously when I say small I mean the kind of length that is ideal for the area around your wrist.

You can find this type of cable you need in old computers. It is usually in the back of the PC casing metal, you need to unpack it this.

Step 1: Dismantle the plastic cased end :

adduce a pair of pliers to remove objects screw type that fastens the plastic housing for a portion of the metal. You cannot unscrew them because they are not screws - they are like bolts, with another subject at home. When you have another component to attach it, with things a little screw on the wings of the casing, such as a cable screen.

After unpacking plastic, cut open it and get it off the wire (can not slip it off as both sides have attached spare parts that are larger than the gap in the plastic casing). Plastic ignored.

2 - Ribbon Wire Bracelet

And any old computer cables laying around? You know the kind, fat ones ribbon wire, and often very colorful. You can make it in a gorgeous bracelet really in no time.

And do not forget to visit our store to see the best

Step 1: Materials and Tools

What you will need:

1. ribbon wire, like the image. Any offer of employment, and I will show you how to adopt to Instruct able about the various offers.

2. decoration supply in gold, silver, copper, etc. choice. It can be found in the local grain store or online.a. Crimps tape. I am using them 19MM long series, but you can use any style you like.

B. Multi-strand clamps lock the slide. This is the most wonderful and easy to take on and once handed. We also recommend using the "tag" type clamps tab, but only if you can find them where the tab on the top rather than the side. See photos for details. It is included other types of joint clamps in the pictures, but we do not recommend this for the bracelets. They are very difficult to use one handed.

C. Jump rings. It is shown 6X4 mm oval jump rings. But common 5MM jump rings will work great too.

3. Tools -

a. Needle nose pliers

B. Superglue

C. Rotary cutter or scissors

D. Cutting surface

E. Ruler

F. nylon jaw pliers are nice to have, but not necessary.